Epoxy Thinset

Thinset and Thin-Set is a special formulation of sand and cement that allows you to install tile and stone to floors and walls. Thinset and Thin-Set is available in two colors: gray or white. Thinset and thin-set is a very important part of the tile and stone installation. If you don't use the proper thinset for your application you will have bond loss. Thinset and thin-set is available in regular and polymer-fortified. The different types of thinset and thin-set are: LATICRETE 255 MultiMax™ Carry only one product onto the jobsite for virtually all applications with this versatile lightweight mortar that replaces mastic, multipurpose and medium bed mortar. LATICRETE 255 MultiMax™ is reinforced with Kevlar® for unmatched non-sag performance and adjustability of large format tile and stone on walls. Builds up to 3/4" (18 mm) without shrinkage for floors without any slump, sag or lippage. Incredibly lightweight consistency allows for easy troweling onto the substrate with minimal effort. A 40 lb. (18.2 kg) bag of LATICRETE 255 MultiMax provides the same coverage as a 50 lb. (22.7 kg) bag of standard thin-set mortar. Mixes with water for maximum strength and performance. Inhibits the growth of stain-causing mold and mildew in substrates with Microban® antimicrobial product protection. LATICRETE 254 Platinum The ultimate one-step, polymer-fortified thin-set that provides unsurpassed strength, far exceeding all ANSI A118.4 and ANSI A118.11 strength requirements. Ideal for interior and exterior applications on virtually all substrates and applications, even pools, fountains and facades. Increases your productivity with long open time, allowing flexibility on the jobsite that results in fast, accurate installations. Easy to trowel mortar assures proper coverage on both the substrates and the veneer as well as less fatigue for the installer. No need to worry with porcelain tile, even in the most difficult projects. The exceptional bond strength and easy workability of LATICRETE 254 Platinum makes this multipurpose the ultimate adhesive for difficult to bond porcelain tiles as well as glass mosaics and large format glass. Inhibits the growth of stain-causing mold and mildew in substrates with Microban antimicrobial protection. LATICRETE 254R Platinum Rapid Excellent for exterior applications, LATICRETE 254R Platinum Rapid has unsurpassed adhesion and workability to exterior glue plywood and concrete and porcelain tiles. This one-step, polymer fortified, thin-set mortar is also designed to mix with water. Inhibits the growth of stain-causing mold and mildew in the substrate with Microban antimicrobial protection. LATICRETE Sure Set™ LATICRETE Sure Set™ is a superior polymer fortified cementitous thin-set which eliminates the need for back buttering large format tile and stone. LATICRETE Sure Set is mixed with water and has unique wetting characteristics which yields maximum coverage on larger tile and stone. This also allows the installer to quickly and easily install tile in a drop, adjust and go method. LATICRETE 253 Gold A smooth and creamy multipurpose thin-set mortar designed to be mixed with water for interior and exterior applications. Meets ANSI A118.4 and ANSI A118.11 strength requirements. LATICRETE 253R Gold Rapid Set and then grout ceramic tile, porcelain, pavers, brick and stone in just 2–4 hours. Meets ANSI A118.4 and ANSI A118.11 Strength Requirements LATICRETE 252 Silver For economical interior and exterior installations. Designed to be mixed with water for a strong bond. Meets ANSI A118.4 and ANSI A118.11* Bond Strength Requirements. LATICRETE 272 Mortar A premium thin-set mortar that can be used for interior use on both floors and walls. Unique high tack and long adjustment time. Ideal for use over masonry, concrete, cement backerboard, mortar beds and gypsum wallboard*. Mix with LATICRETE 333 Super Flexible Additive for increased performance or LATICRETE 3701 Mortar Admix for exterior use. MEETS ANSI A118.1 Strength Requirements. *Interior only. LATICRETE 317 This smooth and creamy, sanded thin-set mortar can be used for virtually every installation, such as interior and exterior applications on floors and walls over masonry, concrete, cement backerboard, mortar beds and gypsum wallboard*. Mix with LATICRETE 333 Super Flexible Additive for increased performance or LATICRETE 3701 Mortar Admix for exterior use. MEETS ANSI A118.1 Strength Requirements. *Interior only. LATICRETE 211 Powder LATICRETE 211 Powder is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates. Designed for use with LATICRETE 4237 Latex Additive to produce a high strength adhesive for ceramic tile and stone that meets and exceeds the requirements of national and international standards. LATICRETE 8500 Glass Block Mortar LATICRETE 8500 Glass Block Mortar is a high-strength, factory-prepared mortar for installing glass block. Economical and easy to use, LATICRETE 8500 Glass Block Mortar is recommended for interior and exterior use. It eliminates job site blending and provides a factory controlled mix for high performance.